|
5928 |
Click on the above
image for a full
view ... |
|
| A high quality DC power supply with an output of 0 to 60V DC at up to 1A max. A separate voltmeter and ammeter are provided for monitoring the output. Voltage output is continuously variable over the range with one 'coarse' rotary control, and is accompanied by an additional 'fine' control which can vary output over 10% of the set value. In addition the voltage level can be remote controlled from an external source and the output can be switched to handle continuous or dynamic loads. Current limiting is provided by further 'coarse' and 'fine' rotary controls, and with these the power supply can be forced to leave 'constant voltage' mode and enter 'constant current' mode. Here the output current is maintained for a given setting of the current control by the output voltage being varied to keep the current constant. Power consumption and dissipation is reduced by a multiple level power saving system which selects lower ratios of the main supply transformer secondary automatically if the output falls below the relevant threshold. The output is provided via three (+), (-) and chassis ground front panel screw terminal posts which accept 4mm wander plugs, spade terminals or stripped wires. Includes overload and reverse polarity protection. |
| Input: |
230V AC ▒10% 50/60Hz |
| Output: |
0 to 60V DC |
0 to 1A DC |
| Load regulation: |
0.01% +3 to 5mV |
0.02% +3mA |
| Line regulation: |
0.01% +3mV |
0.02% +3mA |
| Ripple & noise: |
0.5mV rms |
3mA rms |
| Dimensions: |
128 x 145 x 285mm |
|
